WHITE PAPER

Practical Testing Techniques for Modern Control Loops

New power supply designs are becoming harder to measure for gain margin and phase margin. This measurement is important because step load testing does not measure critical parameters such as conditional stability. Measuring gain and phase of the feedback versus frequency requires finding a point in the loop to inject a test signal. The signal at this point must be confined to a single path, with a low source impedance and high load impedance.  A new technique has been developed which doesn't have limitations and can be implemented on virtually any PWM chip.  Learn more by downloading our white paper that describes best practices for testing modern control loops. In this white paper we will discuss:

Practical Testing techniques fo rmodern control loops WP cover

• Why Measure Feedback Loops?


• How Loops Used to Be Measured


• Impedance Criteria


• Signal Injection in Simple  and Complex Power Supply


• New Signal Injection Techniques


• Modification to Existing Designs


• Relating Feedback Loop Measurement to Transient Response


Download this whitepaper to learn best-practices for testing modern control loops. Complete the form on the right to gain access. 

Download White Paper

Fill out this form to gain access to this white paper.